Deer Feeder Timer & Hopper Runtime Calculator
Enter your feeder timer settings and your own measured feed rate to get lb per feeding, lb per day, days between refills and a printable schedule.
- Free
- No sign-up
- Runs in your browser
Estimates only · data checked November 2026 · About this data
This calculator gives planning estimates only. Feeding or baiting wildlife is regulated differently by state, province and property, so check your local wildlife agency's rules before you set up a feeder, and follow your feeder manufacturer's safety instructions for power and moving parts.
Your entries and saved results stay in this browser. No account, no tool cookies, nothing you enter is sent to a server.
Quick answer
Automatic deer feeders with timer settings run on simple arithmetic. Pounds per day equals feedings per day × seconds per feeding × your measured feed rate. Divide the feed you load by that number to get days between refills. Enter your own values below to get lb/day, a refill date and a printable schedule.
How to use the deer feeder timer calculator
- Enter feedings per day as a whole number from 1 to 24, matching the number of timer slots you use.
- Enter seconds per feeding, the run time you set on the timer. Decimals are allowed and the full numeric value is kept.
- Enter your measured feed rate in pounds per second. If you have a test-run result, type the pounds collected and the seconds run into the helper fields, then press “Use helper result as feed rate.”
- Enter the feed loaded in the hopper. Use the pounds you actually put in, not the capacity printed on the label.
- Optionally set a start date (it defaults to today) and your first and last feeding times to build a schedule.
- Press Calculate. Adjust any schedule time to match what your timer can be set to, then press Print schedule. The Print button stays disabled until there is a valid result with distinct feeding times.
How to measure your feed rate
The calculator has no built-in or “typical” feed rate. Feed type, hopper level, motor and battery condition all change how much a feeder throws, so the only rate worth using is one you measure on your own feeder.
- Load the hopper with the feed you will actually use.
- Place a bucket or tarp under the spinner or chute.
- Run a manual or test feed cycle for a timed number of seconds. Choose the duration yourself and use the same one in every run.
- Weigh the dispensed feed on a kitchen or hanging scale, subtracting the container weight.
- Divide the pounds collected by the seconds run. Repeat and average the results; more runs give a steadier average.
- Recalibrate when the feed type changes, after refilling with a different batch, or when the motor or battery is replaced.
Your feeder manual explains how to start a test cycle and set the timer on your model. This calculator does not replace it.
How the numbers are calculated
- lb per feeding = seconds per feeding × measured rate (lb/s)
- lb per day = feedings per day × lb per feeding
- lb per week = lb per day × 7
- days between refills = pounds loaded ÷ lb per day
- refill date = start date + the whole number of days between refills (the last full day the hopper covers, which is the conservative choice)
- schedule time i = first time + i × (last − first) ÷ (feedings − 1); with one feeding, only the first time is used
All values are computed unrounded. Results are rounded only for display: pounds to 2 decimals (very small positive amounts get extra digits rather than showing 0.00) and days to 1 decimal. Seconds are shown at full precision, without rounding the duration used in the arithmetic. Schedule times are shown to the nearest minute. The start date must be a real calendar date; if the refill date would fall after the year 9999, the arithmetic results still show and the date is left out with a notice. If your values are so small that the result cannot be represented as a finite number, the calculator asks you to check them instead of showing a result. The kilogram readout uses the exact definition 1 lb = 0.45359237 kg. The example below is an arithmetic check only, not a recommended setting.
| Feedings/day | Seconds | Rate (lb/s) | lb/day | Loaded (lb) | Days between refills |
|---|---|---|---|---|---|
| 3 | 5 | 0.1 | 1.50 | 30 | 20.0 |
| 1 | 10 | 0.25 | 2.50 | 10 | 4.0 |
| Arithmetic examples only; use your own measured rate. | |||||
Printable feeding schedule
When you enter a first feeding time, the calculator spaces your feedings evenly between the first and last times. Each row shows the time, the run seconds and the pounds dispensed. If the last time is earlier than the first, the window is treated as crossing midnight; for example, 18:00 to 06:00 with three feedings gives 18:00, 00:00 and 06:00. If the window is too narrow for every feeding to get its own minute, for example three feedings between 06:00 and 06:01, you will see a warning and printing stays off until you widen the window or use fewer feedings. Timers differ in how finely they can be set, so you can edit every time before printing. The printout shows only a summary of your inputs and the schedule.
What this tool does not cover
The calculator only multiplies and divides the numbers you enter. It does not model solar or 12V battery capacity, feed spoilage, weather, how much animals eat, or local rules. A very small daily amount can produce a very long refill interval. That figure is shown as calculated and is not a claim about how long feed stays usable.
Using it with a trail camera over a feeder
Your refill interval is also your visit interval. Each trip to top up the hopper is a chance to swap a card or check the camera’s batteries, so planning both together means fewer trips and less disturbance at the site. If you are still choosing a camera, see our related guides below on setting a deer feeder timer, time lapse over a deer feeder and solar trail cameras.
Methodology & sources
Every figure comes from your own inputs and the formulas above. No third-party feed rates, consumption figures or price data are used, and nothing you type is stored or transmitted.
- Wikipedia: Pound (mass), the exact definition 1 lb = 0.45359237 kg, used for the kg readout.
This calculator gives planning estimates only. Feeding or baiting wildlife is regulated differently by state, province and property, so check your local wildlife agency’s rules before you set up a feeder, and follow your feeder manufacturer’s safety instructions for power and moving parts.
Last updated: October 2026
FAQ
Why does my measured feed rate differ from the feeder manual?
Feed type, hopper level, motor and battery condition all change how much a feeder throws per second. That is why this calculator uses the rate you measure yourself rather than any stock figure.
How is the refill date calculated?
Days between refills is the feed loaded divided by pounds per day. The refill date is your start date plus the whole number of those days, which is a conservative refill date; actual depletion depends on your feeding times.
What if my last feeding time is earlier than my first?
The calculator treats the feeding window as crossing midnight, so a first time of 18:00 and a last time of 06:00 spreads feedings through the night.
Does the calculator store or send what I enter?
No. All arithmetic runs in your browser; nothing is stored or transmitted.
Is the result a guarantee of how long my hopper will last?
No. It is a planning estimate based on the feed rate you entered, so re-measure if feed type, hopper level or power changes.
Related guides
- When to Set Deer Feeder Timer for the Best Daylight Deer Activity
- Should You Use Time Lapse Over a Deer Feeder? Time Lapse vs Motion Trigger
- Are Solar Trail Cameras Worth It? Shade, Winter and Battery Life Tested
- How to Set Up a Bird Feeder Camera for Close-Up Shots and Fewer Misses
- How Do Bird Feeder Cameras Identify Birds? AI Species ID Explained
- Do Bird Feeder Cameras Require a Subscription? Free vs Paid AI Features
More free tools
Cellular Trail Camera True Cost Calculator
Add plan fees, overage and activation to the camera price to see the true total cost, cost per camera-year and break-even of a cellular trail camera.
Free Browser Trail Camera Photo Viewer
View SD card trail camera photos in your browser, sorted by EXIF capture time and grouped into events. Nothing is uploaded.
Game Camera Range & Detail Calculator
Turn a game camera's MP, horizontal FOV and distance into frame width, pixels on the animal and the max range for your own detail minimum.
