Trail Camera SD Card Size Calculator
Estimate how many days your trail camera SD card lasts and the smallest card size that covers the time between your camera visits.
- Free
- No sign-up
- Runs in your browser
Estimates only · data checked October 2026 · About this data
This calculator gives planning estimates only. Check your camera's manual for supported cards and settings, and do not rely on it for decisions about safety, security monitoring or legal compliance.
Your entries and saved results stay in this browser. No account, no tool cookies, nothing you enter is sent to a server.
Last updated: October 2026
Quick answer
What size SD card for a trail camera depends on three numbers: your file size, triggers per day and days between visits. Enter them below to estimate how many days a card lasts and the smallest listed card that covers your visit interval. Then confirm the maximum card size in your camera’s manual.
How to use the trail camera SD card size calculator
- Choose Photo or Video mode to match how your camera is set up.
- Enter your card size in GB as printed on the card, or use the quick pick.
- In Photo mode, enter the photo size per trigger in MB. The calculator assumes one photo per trigger; if you use burst mode, enter the combined MB of all photos saved per trigger. In Video mode, enter the data rate in MB per second and the clip length in seconds. If your manual gives Mbps, divide by 8.
- Enter triggers per day. Use your busiest expected period, not the average, so the card does not fill early.
- Optionally enter your service interval: the number of days between visits to the camera. The tool then shows the estimated GB needed and the smallest listed card size.
- Use Copy link to this result to save or share your scenario. Calculations run in your browser. Copy link puts your inputs in the URL; opening or sharing that link can expose them to the site server and anyone who receives it.
Every result is an estimate. Real usage varies with trigger activity, scene detail and camera settings, which change file sizes from shot to shot.
How many days will my SD card last? The formula
The calculator uses decimal units, the same way card makers label capacity: one gigabyte is one billion bytes and one megabyte is one million bytes, so 1 GB = 1,000 MB.
- Usable fraction: usable capacity % ÷ 100. For example, 95% = 0.95, and the default 100% = 1.
- MB per trigger: photo size in MB (one photo per trigger, or the combined MB of a burst), or video MB per second × clip seconds.
- MB per day: triggers per day × MB per trigger.
- Usable MB: card GB × 1,000 × usable fraction.
- Days until full: usable MB ÷ MB per day, rounded down to whole days. Under one day, the tool shows hours instead.
- GB needed: MB per day × interval days ÷ (1,000 × usable fraction), shown rounded to one decimal.
- Smallest listed card: the first size from 4, 8, 16, 32, 64, 128 and 256 GB that is at least the unrounded GB needed.
The two worked examples below are arithmetic checks only, not typical camera settings. Both use usable capacity at 100% (usable fraction 1) and a 30-day visit interval.
| Scenario | MB per day | Days until full | GB needed (30 days) | Smallest listed card |
|---|---|---|---|---|
| Photo: 32 GB card, 3 MB per trigger, 100 triggers/day | 300 | 106 (from 106.67) | 9.0 | 16 GB |
| Video: 64 GB card, 2 MB/s × 10 s clips, 50 triggers/day | 1,000 | 64 | 30.0 | 32 GB |
Days are rounded down because a card that holds 106.67 days of files cannot finish day 107. Rounding down keeps the estimate on the safe side. The GB-needed figure is rounded to the nearest tenth for display, so a requirement of 9.03 GB shows as 9.0 GB; the card pick always uses the unrounded value. If the GB needed is larger than 256 GB, the tool asks you to shorten the interval, lower the file size or reduce triggers.
What size card do I need for my service interval?
A useful way to size a card is to ask how long you leave the camera between visits. If you check it every 30 days, the card only needs to hold 30 days of files at your busiest trigger rate. The calculator works out that figure and shows the estimated GB needed, rounded to one decimal, beside the smallest listed card, so you can see how much headroom you have. If the result says the card fills before or at your next visit, choose a larger card, visit more often or lower your file size settings.
Where do I find my photo or video file size?
Check your camera’s manual and its resolution, burst and video settings. The most reliable way is to take a few test photos or clips at the settings you will use, put the card in a computer and read the file sizes. Use the larger files you see. If one trigger saves several photos, add their sizes together. This page does not suggest typical file sizes because they vary by camera and settings.
Check your camera’s maximum card size
Every camera has its own supported card type and maximum capacity, so confirm both in the manual before you buy. As one example only, SPYPOINT’s firmware page for the FLEX-S says to use a Micro SD card class 10/U1 up to 512 GB. Do not assume other models share that limit.
The calculator also labels the card family by capacity, following the SD Association: SD covers cards up to 2GB, SDHC covers over 2GB to 32GB, and SDXC covers over 32GB to 2TB. If your manual names a card family, check that it matches.
How to format an SD card for a game camera
Follow the format instructions in your camera’s manual. If the manual says to format the card in the camera, do it there. Back up any photos you want to keep first, because formatting erases the card.
Methodology & sources
All file sizes, data rates, trigger counts and intervals come from you. Calculations run in your browser. Copy link puts your inputs in the URL; opening or sharing that link can expose them to the site server and anyone who receives it. The constants and lists the tool uses come from these sources:
- Wikipedia: Gigabyte and Wikipedia: Megabyte: decimal units, 1 GB = 1,000 MB.
- SD Association: Capacity (SD/SDHC/SDXC/SDUC): card families by capacity.
- Listed card sizes (4, 8, 16, 32, 64, 128 and 256 GB): every capacity named in the product titles of a US Amazon search for “trail camera sd card”, checked October 2026.
- SPYPOINT firmware update (FLEX-S): the single maximum-card example above.
Assumptions: No fixed formatting-overhead allowance is assumed; usable capacity defaults to 100% and can be adjusted. The percentage is divided by 100 before use (95% = 0.95). Photo mode assumes one photo per trigger unless you enter a burst total.
Estimates only; real usage varies with triggers and settings. This calculator gives planning estimates only. Check your camera’s manual for supported cards and settings, and do not rely on it for decisions about safety, security monitoring or legal compliance.
Last updated: October 2026
FAQ
What size SD card do I need for my trail camera?
It depends on your file size, how many triggers you get per day and how many days pass between visits. Multiply MB per trigger by triggers per day and by your visit interval, divide by 1,000 × usable fraction to get GB, then pick the next listed card size up and confirm your camera supports it.
Why does the calculator round days down?
Rounding down keeps the estimate conservative. If the maths says 106.7 days, the card is not guaranteed to hold a full 107th day, so the tool shows 106.
What is the usable capacity percentage?
No fixed formatting-overhead allowance is assumed; usable capacity defaults to 100% and can be adjusted. The tool divides the percentage by 100, so 95% becomes a usable fraction of 0.95.
My camera takes several photos per trigger. What do I enter?
Photo mode assumes one photo per trigger. If you use burst mode, enter the combined MB of all photos saved per trigger.
My manual lists video in Mbps. What do I enter?
The calculator asks for megabytes per second. Divide a megabits-per-second (Mbps) figure by 8 to get MB per second.
Related guides
- Cellular Trail Camera vs Regular SD-Card Camera: Which Should You Buy?
- Can You Use Any SIM Card in a Trail Camera? Carrier and Plan Restrictions
- How to Swap a SIM Card in a Trail Camera Without Losing Your Plan
- Trail Camera Battery Life Chart: Lithium, Alkaline and NiMH by Temperature
- Cellular Trail Camera Not Sending Pictures? Fixes for Signal, Plan and Settings
- How to Store Trail Camera Batteries in the Off Season Without Leaks
More free tools
Cellular Trail Camera True Cost Calculator
Add plan fees, overage and activation to the camera price to see the true total cost, cost per camera-year and break-even of a cellular trail camera.
Deer Feeder Timer & Hopper Runtime Calculator
Enter your feeder timer settings and your own measured feed rate to get lb per feeding, lb per day, days between refills and a printable schedule.
Free Browser Trail Camera Photo Viewer
View SD card trail camera photos in your browser, sorted by EXIF capture time and grouped into events. Nothing is uploaded.
