Skip to content
TrailcamHow logo — trail camera icon with the TrailcamHow wordmark
  • Home
  • About UsExpand
    • Contact Us
  • Cellular Cameras
  • Camera Uses
  • Non-Cellular Cameras
  • Camera Power
  • Free Tools
TrailcamHow logo — trail camera icon with the TrailcamHow wordmark
Free calculator

Solar Trail Camera Battery & Panel Sizer

Estimate how long a trail camera battery lasts and the minimum solar panel watts it needs, from your own battery, current draw and sun-hour figures.

  • Free
  • No sign-up
  • Runs in your browser
Estimates only · data checked October 2026 · About this data

This tool gives a planning estimate only. Always follow your camera, battery and solar panel manufacturers' instructions, use only the battery chemistry and charging inputs your camera is rated for, and do not modify batteries, wiring or charging circuits beyond what the manufacturer allows. Mismatched voltage or damaged lithium batteries can overheat, leak or catch fire.

Your entries and saved results stay in this browser. No account, no tool cookies, nothing you enter is sent to a server.

Quick answer

A battery power consumption calculator divides the usable energy your battery can deliver (volts × amp-hours × usable percentage ÷ 100) by the energy your camera uses each day (volts × average milliamps × 24 ÷ 1000) to give runtime in days. Add peak sun hours and system loss, and it also gives the minimum solar panel watts for your trail camera.

How to use the battery and panel sizer

  1. Enter the battery voltage and capacity in amp-hours from the battery or pack label. If the label shows mAh, divide by 1000.
  2. Optionally set the usable capacity in percent. Leave it blank to use 100%.
  3. Choose how you know the camera’s current draw. Pick the first option if you already have an average figure in mA. Pick the second to build it from a standby current, the charge used per trigger (mAh) and your expected triggers per day.
  4. If your manual quotes the current at a different voltage than your battery, enter that voltage. Otherwise leave it blank.
  5. To size a panel, enter peak sun hours for your own location and season and a system loss percentage. Add a panel rating in watts to check whether that panel covers daily use.
  6. Read the result, then open “Show the maths” to see every formula with your numbers filled in.

Every number comes from you. The calculator does not fill in typical camera draws, sun hours or losses, because those vary by model, settings, location and season. Nothing you type is stored or sent anywhere; it is calculated in your browser.

How the numbers are calculated

The tool uses standard electrical relations: power in watts is current in amps multiplied by voltage, so energy in watt-hours is volts × amps × hours, and a battery’s energy is its voltage × its amp-hour rating. One milliamp is one thousandth of an amp.

Step 1, average current (I_avg). With an average figure, I_avg is the mA you enter. With the build-it-from-parts option, I_avg = standby mA + (mAh per trigger × triggers per day) ÷ 24. Triggers per day are used only in this second option, so they are never counted twice.

  • Battery energy: Wh_batt = V_b × Ah
  • Usable energy: Wh_use = Wh_batt × U ÷ 100
  • Daily use: Wh_day = V_c × I_avg × 24 ÷ 1000
  • Runtime without solar (days) = Wh_use ÷ Wh_day
  • Minimum panel watts = Wh_day ÷ (S × (1 − L ÷ 100))
  • Daily harvest = P × S × (1 − L ÷ 100); net per day = harvest − Wh_day
  • If net is zero or more, the panel meets daily use under these assumptions. If net is negative, runtime with solar = Wh_use ÷ |net|, starting from a full battery.

Here V_b is battery voltage, Ah is battery capacity, U is usable capacity in percent, V_c is the voltage at which the camera’s current is quoted, S is peak sun hours per day, L is system loss in percent and P is the panel rating in watts. Results are rounded for display only, and the minimum panel rating is rounded up to the next tenth of a watt so the shown rating always covers daily use; the comparison and runtime use the unrounded values.

Worked example (example inputs, not a real camera):

StepCalculationResult
Battery energy12 V × 10 Ah120 Wh
Usable energy120 Wh × 100 ÷ 100120 Wh
Daily use12 V × 50 mA × 24 ÷ 100014.4 Wh
Runtime without solar120 ÷ 14.48.3 days
Minimum panel (S 4, L 25%)14.4 ÷ (4 × 0.75)4.8 W
Harvest from a 6 W panel6 × 4 × 0.7518.0 Wh
Net per day18.0 − 14.4+3.6 Wh (meets daily use)
Example inputs, not a real camera.

For the build-it-from-parts option, with example inputs of 10 mA standby, 20 mAh per trigger and 30 triggers a day, I_avg = 10 + (20 × 30) ÷ 24 = 35 mA, and at 12 V the daily use is 12 × 35 × 24 ÷ 1000 = 10.08 Wh.

Finding your camera’s current draw and reading the results

Look in your camera’s manual or spec sheet for power consumption figures. Some list a standby (idle) current in mA and a separate active or per-trigger figure; others give battery life for a stated number of photos. Note the voltage each figure is quoted at. If you measure the draw yourself with a USB or inline meter, that reading is your own measurement for your settings, and cellular uploads, video length and night-time infrared all change it.

Runtime without solar tells you roughly how long a full battery lasts at the average draw you entered. The minimum panel watts is the smallest rating that replaces one day’s use at your sun hours and loss. Sun hours and loss are the biggest levers: fewer sun hours or higher losses quickly raise the panel size needed, so use conservative figures for the darkest part of the season you plan to cover.

The tool computes watts only. A bigger panel does not fix a panel/camera voltage mismatch, so check the panel’s voltage and connector against your camera’s manual before buying or connecting anything.

Limits of this estimate. Cloudy streaks, temperature, battery ageing, charge controller behavior and panel angle are not modeled. The result is a planning estimate, not a guaranteed runtime.

This tool gives a planning estimate only. Always follow your camera, battery and solar panel manufacturers’ instructions, use only the battery chemistry and charging inputs your camera is rated for, and do not modify batteries, wiring or charging circuits beyond what the manufacturer allows. Mismatched voltage or damaged lithium batteries can overheat, leak or catch fire.

Methodology & sources

All inputs are typed by you. Every result is computed from the formulas shown above, and the only fixed numbers on this page are the labeled example inputs. Panel watt ratings are measured at standard test conditions of 1000 W/m², which is why peak sun hours (equivalent hours of that full-strength sun) multiply panel watts.

  • Wikipedia: Ampere-hour — definition of the ampere-hour and power = current × voltage.
  • Wikipedia: Milli- — the milli- prefix as one thousandth (1 mA = 0.001 A).
  • Wikipedia: Nominal power (photovoltaic) — panel ratings measured at 1000 W/m².
  • Your camera manual or spec sheet, and your own meter readings — current draw and the voltage it is quoted at.

Last updated: October 2026

FAQ

How long will my trail camera battery last?

Divide the usable battery energy (usable battery energy = battery volts × amp-hours × usable percentage ÷ 100) by the camera’s daily energy use (the voltage the camera’s current is quoted at × average mA × 24 ÷ 1000). The quoted voltage is often the battery voltage, but use the manual’s figure if it differs; the answer is a planning estimate in days, not a guaranteed runtime.

What size solar panel does my trail camera need?

The minimum panel rating in watts is the camera’s daily energy use in watt-hours divided by peak sun hours × (1 − loss % ÷ 100). Use sun hours for your own location and season, and check the panel’s voltage and connector against your camera’s manual.

Can I use a 6 volt solar panel on my trail camera?

Only if your camera’s manual lists a solar or external power input that matches the panel’s nominal voltage and connector. This calculator sizes watts only; a bigger panel does not fix a voltage mismatch.

Why does the calculator ask for the voltage the mA is quoted at?

Energy depends on both current and voltage, so a current figure quoted at a different voltage than your battery would misstate daily use. Leave it blank to use the battery voltage unless your manual quotes the mA at another voltage.

What are peak sun hours?

Peak sun hours are the equivalent hours per day of full-strength sun, the 1000 W/m² light level at which panel watt ratings are measured. Enter a figure for your own location and season; the calculator does not supply one.

Related guides

  • Are Solar Trail Cameras Worth It? Shade, Winter and Battery Life Tested
  • Cellular Trail Camera Not Sending Pictures? Fixes for Signal, Plan and Settings
  • Moultrie vs Spypoint: Which Cellular Trail Camera Brand Wins in the Field?
  • Cellular Trail Camera Data Plans Compared: Spypoint, Tactacam, Moultrie and More
  • Cellular Trail Camera vs Regular SD-Card Camera: Which Should You Buy?
  • Are Cellular Trail Cameras Worth It? Real Costs vs Time Saved in the Woods

More free tools

Cellular Trail Camera True Cost Calculator

Add plan fees, overage and activation to the camera price to see the true total cost, cost per camera-year and break-even of a cellular trail camera.

Deer Feeder Timer & Hopper Runtime Calculator

Enter your feeder timer settings and your own measured feed rate to get lb per feeding, lb per day, days between refills and a printable schedule.

Free Browser Trail Camera Photo Viewer

View SD card trail camera photos in your browser, sorted by EXIF capture time and grouped into events. Nothing is uploaded.

See all free tools (9) →

  • Home
  • About Us
  • Contact Us
  • HTML SITEMAP
  • Privacy Policy
  • Terms of Service
  • Affiliate Disclaimer
  • How We Research

Please keep in mind that we may receive commissions when you click our links and make purchases. However, this does not sway our reviews and comparisons. We try our best to keep things unbiased, in order to help you make the best choice. As Amazon Associate, we earn from qualifying purchases.

© 2026 TrailcamHow | All Rights Reserved.

Scroll to top
  • Home
  • About Us
    • Contact Us
  • Cellular Cameras
  • Camera Uses
  • Non-Cellular Cameras
  • Camera Power
  • Free Tools
Search